CUSTOMER CARELINE: +603-2770 0100

PRODUCTS

COMMERCIAL EXPRESS WASHER

SWD EXPRESS

Dexter developed the Stack Washer/Dryer Express for laundry owners needing maximum laundry power with limited space. With a 25-30 pound (11.3-13.6 kg) capacity, only the Dexter Stack Washer/Dryer Express can produce a triple load of laundry from dry-to-dry in less than one hour.

Washing gets done in an easy-to-load triple load cylinder that has a final spin at 200 G-Force. High extraction removes more water, shortening the amount of time and energy necessary to dry the load of laundry. Variable Frequency Drive technology ramps motor speed in the washer keeping running AMPs low to help save electricity. VFD technology extends motor life and runs ultra-quiet, keeping your commercial laundry environment pleasant.

RELIABLE DESIGN
  • Heavy-Duty Bearings In a Cast Iron Bearing Housing
  • Welded Steel Spider And Shaft
  • 180 Degree Wide Door Openings
  • Fits Through a Standard 36" Doorway
  • 10 Year Washer Warranty On The Trunion, Bearings, And Bearing Housing
  • 5 Year Dryer Warranty On The Trunion, Bearings, And Bearing Housing
  • 3 Year Parts Warranty
PERFORMANCE FEATURES
  • Perforated Drums And Balanced Airflow
  • Easy To Modify Cycle Times, Temperatures And Cool Down
  • Extra Large Lint Screens Are Easy To Clean And Maintain
  • High Efficiency Recirculating Air Design Reduces Gas Usage
  • Generate More Revenue Through Extended Cycle And Temperature Options
  • Standard 200 G Force Extraction
  • New Lower Service Panel For Simpler Installation And Service
OPTIONS
  • Galvanized Or Stainless Steel Cyclinders (Dryers Only)
  • Available As Natural Gas (Propane Kits Available)
  • Choice Of Stainless Steel Or Chrome Door On Dryer
  • Available As Coin Operated Or Debit Card Ready
DIMENSIONS / CAPACITY STANDARD METRIC
Dry Weight Capacity 30 lb (13.6 kg)
Cylinder Diameter 25.0” (63.5 cm)
Cylinder Depth 14.13” (35.9 cm)
Cylinder Volume 4.0 cu.ft. (113.4 l)
Floor to Door Bottom 16" (40.6cm)
Door Opening 15.25” (38.71 cm)
Speeds G-Force (RPM)
High Speed Extract 200G (750 RPM)
Intermed. Extract Speed 60G (411 RPM)
Washing Speed .96G (50 RPM)
Motor Size 2 HP (1.5 KW)
Electrical STANDARD METRIC
Electrical Phase Single or Three Single
Electrical Voltage 208-240 230
Electrical Running (Amps) 6.2 6.5
Circuit Protection (Amps ) 15 amp 15 amp
Electrical Wire Size 12 gauge 12 gauge
Electrical Service (Single) 2 Wire + Ground 2 Wire + Ground
Electrical Service (Three) 3 Wire + Ground  
WATER STANDARD METRIC
Water inlet size 3/4" (19 mm)
Flow Rate (per min) 9 gal (34.1 LPM)
Pressure (min/max) 30 - 120psi (207-827 kPa)
Drain Diameter (O.D.) 3” (7.61 cm)
Floor to Center of Drain 4.5” (11.23” cm)
INSTALLATION RECOMMENDATIONS STANDARD METRIC
Clearance Between Machines 1/2” (min) (1.31 cm)
Clearance Behind Machines 24” (min) (61.1 cm)
Concrete Thickness 6” (min) (15.24 cm)
Net Weight - lb (kg) 1039 lbs (471.3 kg)
SHIPPING DIMENSIONS STANDARD METRIC
Shipping Weight 1090 lbs (494.4 kg)
Height - in (cm) 83.25” (211.38 cm)
Width - in (cm) 33.0” (83.22 cm)
Depth - in (cm) 54.0” (137.2 cm)
DIMENSIONS / CAPACITY STANDARD METRIC
Dry Weight Capacity 30 lb (13.6 kg)
Cylinder Diameter 30.0” (76.2 cm)
Cylinder Depth 27.5” (69.9 cm)
Cylinder Volume 11.25 cu.ft. (325.6 l)
Floor to Door Bottom 48.0” (115.2 cm)
Door Opening 22.7” (57.6 cm)
Airflow - cfm (M3/min)
60Hz 500 cfm (14.6 M3/min)
50Hz 450 cfm (12.7 M3/min)
BTU’S /CIRCUIT BREAKER / RUNNING AMPS / WIRE SIZE STANDARD METRIC
Gas Supply Connection 0.5” (12.7 mm)
Natural Gas Supply - (water column) 4 - 10” (10.2 - 25.4 cm)
LP Gas Supply - (water column) 11.5 - 14” (29.2 - 35.5 cm)
Gas Models
60Hz 80,000 BTU/hr (26.4 kW) / pocket  
50Hz 74,000 BTU/hr (21.7 kW) / pocket  
Gas
-21 (230/50/1 - 3 wire + ground) 15 amp / 5.0 amp / #12  
-10 (120/60/1 - 2 wire + ground) 15 amp / 9.8 amp / #12  
Electric (per pocket)
-27FL (220/50/1 - 2 wire + ground) - 20kW 110 amp / 110 amp / #1/0  
-64FN (400/50/3 - 4 wire + ground) - 24kW 50 amp / 45 amp / # 6  
INSTALLATION RECOMMENDATIONS STANDARD METRIC
Clearance Behind Machines 18” (45.7 cm)
Make-up Air Req. (per dryer) 1.0 sq.ft. (1394 sq.cm)
Exhaust Size - in (cm) 6” (20.3 cm)
Approvals** UL / SA / AGA  
** Agency approvals may vary depending on configuration. Consult factory for details. For the most accurate information, please consult machine installation guide for all design and construction purposes. Due to continuous product improvements, design and specifications subject to change.

Click here to download.

RELIABLE DESIGN
  • Heavy-Duty Bearings In a Cast Iron Bearing Housing
  • Welded Steel Spider And Shaft
  • AISI 304 Stainless Steel Top, Front And Side Panels
  • Fits Through a Standard 36" Doorway
  • Sump-Less Outer Tub Design Saves Water On Every Cycle
  • 10 Year Washer Warranty On The Trunion, Bearings, And Bearing Housing
  • 3 Year Parts Warranty
PERFORMANCE FEATURES
  • Powerful 200 G-Force Extraction
  • Perforated Cylinders And Raised Baffles For Superior Wash Action
  • Easy To Modify Cycle Times, Temperatures And Programming
  • Generate More Revenue Through Extended Cycle and Temperature Options
  • Energy Efficient Inverter Drive Technology
  • Rugged Frame Design Proven For Over Two Decades
  • All Dexter Washer Designs Pass 1000 Hour Out of Balance Test
OPTIONS
  • Blue Or Black Graphics
  • Available Coin-Op Or Debit Card Ready
  • Capacities Available: 20lb, 30lb, 50lb, 60lb And 90lb

NEWS UPDATES

Dileka Ionized Water enhanced Xpro Anti-Bacteria

Dileka Ionized Water system wash your clothes "Cleaner than Clean" with Xpro anti-bacteria which kills 99.9% bacteria.

- Clothes are sanitized

- Eliminates Odours 

- Eco-friendly

- No Detergent & Softener needed

- Save Money

**Selected outlet only

Posted on 23-Mar-2018